| SERVOCAMDRIVE & ROLLER DRIVE | ||
 |
▶ SERVOCAMDRIVE & Roller Drive are reducer type indexing drives that are suitable for machineries and equipment requiring high out torque and zero-backlash.
▶ It consists of roller gear cam and cam follower bearings, which yield high efficiency. ▶ It can be used without number of stops limitation. |
|
| Backlash Accuracy | Applied product models | |
| Less than 3 arc.min. | CFR, CSR, CTR, CAR, CRR | |
| Less than 1 arc.min | RA | |
| Zero-backlash | RB, RC, RH, RE | |
| OSCILLATING DRIVE | |
 |
▶ Oscillating drive is a device that yields reciprocating rotation movement with a certain angle. ▶ Its movement patterns can be selected by various timing charts. ▶ It consists of roller gear cam and cam follower bearings, which yield high efficiency and less backlash. ▶ It can be connected with rectilinear movement devices by using oscillating arms. ▶ It uses MS curve that makes its movement smooth. |
| Applied product models | |
| EF, ES, EU | |
| INDEXING OR OSCILLATING AND UP/DOWN DRIVE | |
 |
▶ The output shaft generates 2-dimensional movements, rotation and up & down movement.
▶ It can be used as one of pick & place parts handling devices. ▶ It consists of roller gear cam and common grooved cam, of which combination yield diversified movements for various applications. |
| Applied product models | |
| CHT, FNH, FHH | |
| PICK & PLACE UNIT DRIVE | |
 |
▶ The pick & place unit, combined with automated machineries and equipment, is a parts handling device with high accurate movement working well even at faster speed than at the speed hydraulic or pneumatic device provide. (Repeatability of movement: 0.02mm).
▶ Adopted two linear guide, it can be installed in a smaller space. ▶ It has a longer stroke than oscillating index drives, and generates complex patterns of movements. (Up-and-down Stroke: 65 mm, Back-and-forth Stroke: 200 mm) ▶ It has a compact and smaller housing so that it can be extensively used for automation equipment and assembling lines. |
| Applied product models | |
| PP | |
| INDEXING DRIVE | |
 |
▶ The common index drives generate its intermittent movement shown to the left. ▶ It boasts its high accurate repeatability and indexing accuracy, and is applicable for various machineries and devices for automation. ▶ It utilizes diversified cams such as roller gear cam, parallel cam or barrel cam, and different cam curves can be adopted for particular movements. |
| Applied product models | |
| CF, CS, CFS, CT, CA, CP, CU, CR, BVR, BFR | |
| MULPIPLE INDEXING DRIVE | |
 |
▶ The multiple indexing drives are able to yield the non-integer number of stops such as 4.5 stops or 5.5 stops by using odd numbers of stops such as 9 stops or 11 stops. ▶ The indexing drive with 4.5 stops or 5.5 stops can be used for the equipment or machineries that require two kinds of works in one device. ▶ It gives the same efficiency as two index drives applied. |
| Applied product models | |
| CF, CS, CFS, CT, CA, CU | |